Acid Strength, Conjugate Pairs & Ka — Practice · Grade 11 Science
Chapter: Acids, Bases & TitrationWhat this practice covers
By the end of Acid Strength, Conjugate Pairs & Ka you should be able to:
- I can identify conjugate pairs and distinguish strength from concentration.
- I can estimate weak-acid ionization and check a simplifying assumption.
8 questions, numeric and written answer, each with a worked explanation.
Vocabulary used: conjugate pair, Ka, pKa.
Problem 1
Hints
Write the relationship first; substitute with consistent units.
Answer and explanation
6
−log 10(10⁻⁶)=6.
Problem 2
Answer and explanation
No. Strong concerns fraction ionized; concentrated concerns amount per volume.
Response criteria
- State a scientifically accurate conclusion.
- Show the calculation or mechanism that supports it.
- Include units, conditions, or limits where relevant.
Problem 3
Hints
List the given quantities, select a relationship, and check units before substituting.
Answer and explanation
4
−log 10(10⁻⁴)=4.
Problem 4
Hints
Write the relationship first; substitute with consistent units.
Answer and explanation
2
−log(.010)=2.
Problem 5
Hints
A smaller pK_a corresponds to larger K_a.
Answer and explanation
The pK_a=3 acid, since its K_a is 100 times larger.
Problem 6
Hints
State what the supplied observations or conditions establish, and separate that from any assumption.
Answer and explanation
x≈√10⁻⁶=0.0010 M; x/C=1%, so small-ionization approximation is reasonable and pH≈3.
Problem 7
Answer and explanation
Compute x/C, approximately 0.00100/0.100=0.0100, or one percent, and compare with the desired accuracy.
If x is small relative to initial acid concentration C, replace C−x by C to obtain x≈√(KaC). Then check the inferred x/C against a stated tolerance; a classroom five-percent rule is a heuristic, not a universal error guarantee. The selected numbers give about one-percent ionization, so the approximation agrees closely with the quadratic result. When ionization is substantial, added conjugate base is present or water matters, solve the appropriate fuller equilibrium rather than forcing the shortcut.
Compute x/C, approximately 0.00100/0.100=0.0100, or one percent, and compare with the desired accuracy.
Response criteria
- Interpret labels, structures, axes, units and directions correctly.
- Explain the chemistry relationship or mechanism.
- Respect stated assumptions and distinguish observation from inference.
Problem 8
Answer and explanation
x≈√(KaC)=√(4.0×10⁻⁶)=0.0020 M. pH≈2.70. x/C≈0.010=1%, supporting the approximation for ordinary classroom accuracy under the stated species model.
x≈√(KaC)=√(4.0×10⁻⁶)=0.0020 M. pH≈2.70. x/C≈0.010=1%, supporting the approximation for ordinary classroom accuracy under the stated species model.
Response criteria
- Use the stated measurements or conditions, with correct units.
- Connect the result to the chemical mechanism or evidence relationship.
- Identify the assumption, model limit or further evidence requested.