Parent plan · Week 8 · Forces, Rotation & Equilibrium — connect, calculate and revise — Physics & Environmental Science
Parent teaching plan · 36 weeksUnits to teach or revisit
Chapter 3 · Forces, Rotation & Equilibrium
Assigned readings
Develop this chapter question: Which interactions explain acceleration or equilibrium?
This week’s goals
- Explain models, objects, arrows and axes before substituting values.
- Conserve the relevant charge, momentum, matter and energy account.
- Apply independently, state limits and revise from evidence.
Read The force on the box is not the force on the floor at chapter launch and revisit it alongside this week’s linked units, figures and investigation.
Five flexible sessions, normally 50–60 minutes. Two core unit sessions are scheduled, with a third for selected demanding topics. Sample week uses a complete 90-minute paper plus about 30 minutes of corrections within two ordinary-hour equivalents.
Session 1 · Extended calculation and transfer — Springs, Torque & Static Equilibrium
Use the linked chapter reading, unit explanations, figures and notebook.
Your task
Reconstruct a worked method without looking at its answer. Then solve this changed case, show intermediate steps and units, explain a limit and compare a second method where appropriate: A weightless 2 m beam is pivoted at its left end. A 60 N load acts 0.50 m from the pivot. An upward force acts at the right end. Find that force and vertical pivot reaction for equilibrium.
- Prepare the assigned explanation and identify the question.
- Trace a model or graph, labeling its quantities and units.
- Attempt the assigned reasoning and calculation before opening guidance.
- Compare with criteria and retain an explained correction.
Hint and response guidance
Name the objects, quantities, boundary and assumptions before choosing a relationship. Use the matching figure to check each step.
Torque balance: F×2=60×0.50, so F=15 N upward. Vertical balance gives pivot reaction=60−15=45 N upward. Both balances are necessary.
- Use the supplied evidence and correct quantity/units.
- Explain the relevant mechanism or relationship.
- Show intermediate working or a labeled model.
- State an assumption, limitation or useful next test.
Session 2 · Spring Force and Torque Evidence — plan and examine records
Use the linked chapter reading, unit explanations, figures and notebook.
Your task
Read the full investigation. Define question, boundary, variables, units and route. Use a suitable supervised method or the complete supplied-data route, preserving all records and a first model.
- Prepare the assigned explanation and identify the question.
- Trace a model or graph, labeling its quantities and units.
- Attempt the assigned reasoning and calculation before opening guidance.
- Compare with criteria and retain an explained correction.
Hint and response guidance
Name the objects, quantities, boundary and assumptions before choosing a relationship. Use the matching figure to check each step.
The slope gives k=100 N/m and energy at 0.03 m is 0.045 J. A 2 N input balances the load torque; support must also balance vertical force. Curvature or permanent stretch challenges the elastic model. Preserve the original observations, intermediate working and a labeled mechanism. Report the relevant boundary and model assumptions, discuss an alternative explanation, and identify the next useful measurement; do not replace unexpected data with the illustrative record.
- Use the supplied evidence and correct quantity/units.
- Explain the relevant mechanism or relationship.
- Show intermediate working or a labeled model.
- State an assumption, limitation or useful next test.
Session 3 · Spring Force and Torque Evidence — calculate, explain and revise
Use the linked chapter reading, unit explanations, figures and notebook.
Your task
Calculate/graph the records with correct labels. Answer the analysis questions, compare an alternative account, revise the model and submit a report with evidence, uncertainty and next test.
- Prepare the assigned explanation and identify the question.
- Trace a model or graph, labeling its quantities and units.
- Attempt the assigned reasoning and calculation before opening guidance.
- Compare with criteria and retain an explained correction.
Hint and response guidance
Name the objects, quantities, boundary and assumptions before choosing a relationship. Use the matching figure to check each step.
The slope gives k=100 N/m and energy at 0.03 m is 0.045 J. A 2 N input balances the load torque; support must also balance vertical force. Curvature or permanent stretch challenges the elastic model. Preserve the original observations, intermediate working and a labeled mechanism. Report the relevant boundary and model assumptions, discuss an alternative explanation, and identify the next useful measurement; do not replace unexpected data with the illustrative record.
- Use the supplied evidence and correct quantity/units.
- Explain the relevant mechanism or relationship.
- Show intermediate working or a labeled model.
- State an assumption, limitation or useful next test.
Session 4 · Chapter review and targeted correction
Use the linked chapter reading, unit explanations, figures and notebook.
Your task
Attempt the full chapter review before consulting guidance. Include the changed transfer cases and explain why an earlier error occurred. Select further practice from marked evidence.
- Prepare the assigned explanation and identify the question.
- Trace a model or graph, labeling its quantities and units.
- Attempt the assigned reasoning and calculation before opening guidance.
- Compare with criteria and retain an explained correction.
Hint and response guidance
Name the objects, quantities, boundary and assumptions before choosing a relationship. Use the matching figure to check each step.
Use each item’s supplied worked guidance and criteria; retain both an independent attempt and an explained correction.
- Use the supplied evidence and correct quantity/units.
- Explain the relevant mechanism or relationship.
- Show intermediate working or a labeled model.
- State an assumption, limitation or useful next test.
Session 5 · Chapter quiz and human marking
Use the linked chapter reading, unit explanations, figures and notebook.
Your task
Attempt the complete chapter quiz independently. Mark objective answers afterward and have a parent/teacher judge written explanations using the criteria. Discuss priority corrections.
- Prepare the assigned explanation and identify the question.
- Trace a model or graph, labeling its quantities and units.
- Attempt the assigned reasoning and calculation before opening guidance.
- Compare with criteria and retain an explained correction.
Hint and response guidance
Name the objects, quantities, boundary and assumptions before choosing a relationship. Use the matching figure to check each step.
A correct unsupported number does not replace the requested reasoning. Use the item criteria and preserve examples of independent work.
- Use the supplied evidence and correct quantity/units.
- Explain the relevant mechanism or relationship.
- Show intermediate working or a labeled model.
- State an assumption, limitation or useful next test.
Submit this week
- Labeled first/revised models and intermediate calculations.
- Assigned practice and assessed attempts with explained corrections.
- Investigation record/report when assigned, identifying supplied versus collected data.
Parent / teacher weekly conference
Use actual written work to adjust support. Do not count a copied solution as independent mastery. Extend or redistribute time where needed; home-study records do not certify supervised or mandated laboratory requirements.
- Can each relevant symbol and unit be explained?
- Does the calculation conserve the appropriate quantities?
- Can the learner solve a changed case and explain an assumption?